| Specifications |
| Power |
24V , 100mA from VF-S11 Control Card. |
| LED’s |
3 LED’s for status indication |
Communication Ports
COM1
COM2
|
RJ-45 for Option Unit [TYPE-FORM : RKP001Z-0] Or
for Project Download and Firmware Up gradation
(Using CMOS-232-01-00, Renu Electronics Make)
9 Pin D-Sub (2 wire RS485) Profibus – DP slave
DPV0 (Cyclic Communication)
|
| Isolation |
Isolation between communication ports and
Power supply, through DC-DC coupler is 1 KV.
Isolation between
communication ports (Option Port and Profibus Port), through
optoisolation is 1KV for 1 min.
|
| Profibus Baud Rate |
9.6k, 19.2k, 45.45k, 93.75k, 187.5k, 500k,
1.5M, 3M,
6M, 12M Bit/s (Autodetect)
|
| GSD File |
Supplied in the Installable Software
CD.
|
| GSD File Name |
RENU0A0E.GSD
|
| I/O data |
100 Word Input, 100 Word Output
|
| *Inverter ID |
0 - 125 (At power ON, station number is
detected
automatically)
|
| Temperature |
Operating : 0o to
60o C
Storage : -20o to 80o C |
| Humidity |
10% to 90% (Non condensing) |
| Certifications |
CE |
| Immunity to ESD |
Level 3 as per
IEC 1000-4-2 |
| Immunity to Transients |
Level 3 as per
IEC 1000-4-4 |
| Immunity to Radiated
RF |
Level 3 as per
IEC 1000-4-3 |
| Immunity to Conducted RF |
Level 3 as per IEC1000-4-6 |
| Emissions |
EN55011 CISPR
A |
|
*Note 1: Inverter ID should be unique,
when there are multiple inverters connected in the network.
Note 2 : Once You install Gateway Setup
Software, you will find GSD file at:
“C:\Program Files\Gateway 3.09\GWY-5oo(Profibus
Gateway)\GSD”.
This is the default path. The actual path is where the user
has installed Gateway Setup Software.
Note 3 : GSD file is also provided in the
CD along with the Installable software.
Note 4 : Previously the model name in GSD
file was GWY-500-B. Now it is changed to GWY-XXXXX to
support all the products having Profibus port. |
