GWY-300 Operations

GWY-300 is a Protocol Converter / Data sharer for devices like PLCs, Inverters, Controllers etc. GWY-300 has a serial port that connects to a serial device and a CAN port which connects to CAN BUS. GWY-300 communicates with a device to get the information required by the other device. Our Windows® based Gateway setup software makes it easy to configure the protocol converter. After choosing which protocol to use for each port, user can program the Gateway to transfer the data blocks. Using a simple spreadsheet format, user can simply program the Gateway to fetch a specified number of registers or bits from one device and transfer them to the other. Powerful software allows user to transfer all the information continuously or allows the PLC to control the transfer of data from selected blocks. System requirements for Gateway Setup Software are: Windows Version   : Microsoft Windows 9x/NT/2000/XP Processor             : PENTIUM or higher Hard disk Space    : 5 MB or more Mouse                  : Required RAM                     : 16 MB or more Display resolution  : 800 X 600 (VGA) or better Display colors       : 16 bit color  Programming software is common for the entire Gateway family. Other Accessories required for the GWY-300 configuration and to use in actual application: 1. Gateway Configuration / Connecting Cable. 2. Gateway Setup Software . 3. Devices with communication cables. GWY-300 communication ports: GWY-300 has two communication ports COM1 and COM2. COM1 port is compatible to RS232 / RS422 / RS485 and the other is a CAN communication port (COM2).  The Pin-outs of these ports are as shown below:                                                                                                       *Do not use pin no. 6