| FL010 and FL050 Specifications |
| Functional |
| Control Method |
Stored program cyclic scan system |
| I/O Processing |
Batch I/O update(refresh) and Direct I/O access |
| I/O Points |
Main unit: 16 points (8 inputs/8 outputs)
Expansion I/O: Up to 8 I/O modules,
Expandable up to 128 points |
| Programming Language |
Ladder diagram |
| Program Capacity |
8K Steps |
| Memory |
Program: Flash Type
Data: SRAM and EEPROM |
| Execution Speed |
1msec/1000 steps for boolean instructions |
| User Data |
Timer Registers
Counter Registers
System Registers
Internal Registers
Data Registers
Input Registers
Output Registers
Configuration Registers
Configuration Coils
System Coils
Internal Coils
Timer Coils
Counter Coils
Retentive Registers |
256 Words (R/W)
256 Words (R/W)
256 Words (R/W)
256 Words (R/W)
4096 Words (R/W)
400 Words (Max) (R)
400 Words (Max)
1600 Words (Max)
25600 Points (Max)
100 Points (R/W)
4096 Points (R/W)
256 Points
256
Points
1400 Words |
| Clock-Calendar |
Year, month, day, hour, minute, second, &
day of the week |
| Special I/O Functions |
High-speed counter (2 single or 1 quadrature)
Transistor output configurable as one PWM or CW/CCW mode |
| Timer |
256 timers T0000 to T0255
T0000 to T0060: 10ms
T0061 to T0190: 100ms
T0191 to T0255: 1s |
| Communication Interface |
1 Port of RS232/RS485 on RJ45
1 Port with 2-wire RS 485 on Terminal Block
1 USB Port for Programming and monitoring (Device) |
| Electrical |
| Power Supply |
DC powered units - 24VDC (+/-15%) |
| Discrete Inputs (FL010) |
Input points
Input voltage - Rated
Input current - Rated
Minimum ON voltage
Maximum OFF voltage |
8 points (8 points/common)
24 VDC, +/- 10%
5 mA for normal and 20 mA for High Speed input
9.6 VDC
3.6 VDC |
| Relay Output Specifications (FL010) |
Output points
Maximum voltage
Maximum Current |
6 points (3 points/common)
230 VAC/24VDC
2A/point (resistive), 6A/common |
| |
| General Specifications |
| DC Output specifications (FL010) |
Output points
Maximum voltage
Maximum Current |
2 points (2 points/common)
+24VDC
0.5A/point (resistive) |
| Environmental (FL010, FL050) |
Temperature
Humidity
Vibration immunity
Shock immunity
Dimensions (mm)
Isolation |
0 to 55º C (operating), -20 to 85º C (storage)
10 to 90 % non condensing
IEC60068-2-6
IEC60068-2-27
100mm(H) X 36mm(W) X 70mm(D)
Isolation between communication ports,
power
and I/O is 500 V DC for 1 Min. |
| EMI/EMC (FL010, FL050) |
Immunity to ESD
Immunity to Transients
Radiated Susceptibility
Immunity to conducted RF
Immunity to Surge
Emissions |
Level 3 as per IEC61000-4-2
Level 3 as per IEC61000-4-4
Level 3 as per IEC61000-4-3
Level 3 as per IEC61000-4-6
Level 3 as per IEC61000-4-5
EN550081-2 |
| Digital I/O Specifications : |
Expansion IO capacity
|
8 expansion modules |
Expansion Bus
|
SPI (1 MHz) |
Local IOs
|
16 (8 IN / 8 OUT) |
Digital Inputs
|
8 Unidirectional Digital inputs
(2 High Speed inputs of up to 50KHz)
8 points per common |
Rated Input voltage
|
24VDC |
Rated Input Current
|
Up to 5mA. (20mA for High Speed I/Ps) |
Input Impedance
|
5.4Kohm (1.2Kohm for High Speed I/Ps) |
Minimum ON voltage
|
9.6 VDC |
Maximum OFF voltage
|
3.6 VDC |
Turn ON time
|
10 msec |
| Turn OFF time |
10 msec |
Isolation
|
Optically isolated from internal
circuit |
Digital outputs
|
6 Relay (Form A) outputs
3 points per common
2 Transistor Output |
Output Capacity
|
2A per o/p for Relay (6A per
common),
0.5 A for transistor |
| Rated load |
230V / 2A, 30VDC / 2A for Relay,
0.5 A at 24VDC for transistor |
| Analog I/O Specifications : |
For mVolt inputs Uses 0-100 mV input range resolved in 16 bits.
Total error max : ± 0.2% of scale ±1 LSB. |
For Current inputs
Uses 0-20mA input range is resolved in 16 bits.
Total error max : ± 0.2% of scale ±1 LSB. |
For Volt inputs
Uses 0-10V input range resolved in 16 bits.
Total error max : ± 0.2% of scale ± 1 LSB. |
For RTD input (Pt100/ Pt1000)
Uses 3 wire compensation technique.
Excitation Current is 0.1mA.
Power dissipated in RTD is 0.025mW max @ 100 W
Range supported : -200 to 850oC. |
For Thermocouple Input
Uses 0-100mV input range resolved into 16 bits.
Cold junction error is 1o maximum and 0.5o typical.
Total error max : 0.5% of scale ± 1 bit + CJC error
Temperature Drift for Input and Output : 60 PPM max |
| Input Type |
Temperature Range |
1 bit Corresponds to |
| J |
-210 to
1200º C |
0.035º C |
| K |
-200 to 1373º C |
0.049º C |
| E |
-200 to 1000º C |
0.027º C |
| R |
-50 to 1769º C |
0.16º C |
| S |
-50 to 1769º C |
0.18º C |
| B |
0 to 1820º C |
0.25º C |
| N |
-200 to 1300º C |
0.056º C |
| T |
-200 to 400º C |
0.043º C |
| Analog
Outputs |
| Resolution |
16 Bit |
Load:
4-20 mA
0-10 V DC |
Less than 500 W
Minimum 1K W |
|
