Better Business Through Little Attachments
>> Products > FIOA-0800-L (Analog Input Module) > Specifications
FIOA Series Overview
Overview | Specifications | Operations | Applications
 Specifications

For Current inputs :
Uses 4-20mA input range with 100 E precision shunt resolved in 12 bits.
Total error : ± 0.2% of scale ±1 bit.

For Voltage inputs :
Uses 0-10VDC input range resolved in 12 bits.
Total error : ± 0.2% of scale ± 1 bit.
General Specifications
Power  + 24V DC ± 10%, 2W maximum
Operating Temp.  0º to 50º C
Storage Temp.  -20º to 80º C
Humidity  10% to 90% (Non Condensing)
Mounting  DIN rail mounting
Dimensions  100 W x 70 H x 35 D mm
Immunity to ESD  as per IEC61000-4-2
Immunity to Fast Transients  as per IEC61000-4-4
Immunity to Radiated electromagnetic field  as per IEC61000-4-3
Immunity to Conducted disturbances  as per IEC61000-4-6
Surge  as per IEC61000-4-5
Radiated emission  as per EN61000-6-4
Communication Port  2 wire RS485 terminal block
Communication Protocol  Modbus RTU Slave
Baud rate
 		  9600, 19.2k, 57.6k or 115.2k
 (DIP Switch Selectable)
Parity  Odd, Even or None
 (DIP Switch Selectable)
Device ID  1-255 (DIP Switch Selectable)
 Typical Wiring Diagram :-  Analog Inputs

Current Mode connections (4-20 mA)

Voltage Mode connections (0-10 VDC)    

 

Note:
AINx: Analog input (x equals to 1 to 8).
AGND: Analog ground.
          Analog ground for all channels is internally shorted on PCB.